Infitek Laboratory Chemical Fume Hood Fume Cupboard with CE FDA

• Transport Package: High-Quality Cartons/Crates
• Specification: 250, 280, 330, 390kg
• Trademark: Infitek
• Origin: China
• Model NO.: FMH-DF Series
• Production Capacity: 200 Units/Month

Product Description

Infitek Laboratory Chemical Fume Hood Fume Cupboard with CE FDA

Features

New arrival, while the event is in progress

FMH series fume hood is a kind of negative pressure ventilation system for protecting operator and laboratory, utilizes carbon filtration to protect laboratory personnel from toxic chemical fumes, odors, and particles. Known for its plug-and-play feature and mobility, fume hood guarantees a hassle-free installation and no lab work interruption.

Application scenarios

Application for medical institutions, CDC, pharmaceutical factories, blood banks, animal husbandry, food processing plants, Cosmetics manufacturers, as well as various R&D institutions and electronic and electrical manufacturers.

Advantages

Humanized Features:

• Ergonomic Control Panel Location, centered and angled down for an easy reach & viewing.
• Made of solid physicochemical board, resistant to strong acid and alkali
• The non-direct light source design can effectively relieve the operator's visual fatigue under the condition of ensuring the illumination
• Intuitive and easy-to-use microprocessor controller with LCD display, graphical and digital display of the operating status of each function, such as filter life, UV life etc.

Safety Features:

• Front sliding sash interlock with fan and UV lamp
• UV sterilization with UV lamp timing function
• Front sash and side windows are made of UV-resistant tempered glass
• The host and sockets have independent capacitors to prevent current overload

Convenience Features:

• Memory function in case of power-failure.
• Filter and UV life indicators facilitate a timely replacement plan
• Two side glass windows installed for easy experiment observation
• Equipped with temperature sensor to show the real temperature during operation
• Waterproof socket provide convenience for small instruments to be used in the operating area

• Performance Test
  

Specification

Model		FMH-D3F	FMH-D4F	FMH-D5F	FMH-D6F
External Dimensions (W*D*H)(mm)		1000*850*2150	1220*850*2150	1525*850*2150	1830*850*2150
Internal Dimensions (W*D*H)(mm)		880*730*745	1100*730*745	1405*730*745	1710*730*745
Control System		Microprocessor controller with LCD display, graphical and digital display of the operating status of each function.
Maximum Opening		520mm
Work Surface Height		750mm
Airflow Velocity		Adjustable, 0.3~0.8 m/s
Air Volume(m³/hr)/(cfm)		657/387	868/511	1085/639	1085/639
Active Carbon Filter	Dimensions(W*D*H)(mm)	750*495*30	1055*495*30	1360*495*30	1665*495*30
	Quantity	1pc
Sound Emission		≤68dB(A)
Fluorescent Lamp		6.5W*1	9.6W*1	9.6W*1	9.6W*1
		LED type, Intensity ≥900Lx
UV Lamp		20W*1	30W*1	30W*1	30W*1
		With timing function, Interlock with front sliding sash. Emission of 253.7 nanometers for best sterilization effect.
Power Consumption		400W	500W	500W	500W
		The power consumption does not include external device connected via power socket
Cabinet Construction		Main Body: Electro-galvanized steel with antimicrobial powder coating
		Work Table: Solid physicochemical board, resistant to strong acid and alkali
		Manual Sliding Sash: 5 mm UV resistant tempered glass with counter-balance system and ergonomic handle
		Side Windows: 5 mm UV resistant tempered glass
Electricity		AC220V ±10%, 50/60Hz,1P
Standard Accessories		Base stand*1; LED lamp*1; UV lamp*1; Waterproof socket*2(only 1 for FMH-D3F); Casters with brakes*4; Activated carbon filter*1; Water tap*1; Gas tap*1; Water sink(220*95*150mm)*1; Exhaust duct-10meters*1; Solid physicochemical countertop*1
Optional Accessories		HEPA filter; Wind speed sensor;Foma casters; 304 stainless steel countertop; Base Cabinet
Shipping Weight(kg)		250	280	330	390
Shipping Dimensions (W*D*H)(mm)		1140*1100*1635	1360*1100*1635	1665*1100*1635	1970*1100*1635
Shipping Volume (m3)		2	2.5	3.1	3.6

Packaging & Shipping

 

Certifications

About us

 

FAQ

Q: How about quality of the goods?

A:

l All the running products comply with CE standards.

l Independent quality inspection team, conducting multiple inspections and random inspections from parts supply to product dispatch.

l Well-known third-party testing service available, such as SGS, BV, and TUV, etc.

 

Q: What are your pre- and after-sales services?

A:

l Timely reply to pre-sales enquiries

l Real-time update of manufacturing and shipment status

l Contracted third-party maintenance company in over 60 countries

Assured availability of parts supply for 10 years at least

 

Q: Is OEM service available.

A: Most of the running products are available for OEM customization, including logo, package and function, if attainable, customization.

 

Q: How long is the lead time:

A: Generally, the lead time for most stocked products is about 7~15 days, vary by models and production schedule. For those non-stocked products, the manufacturing lead time is around 20 days.